Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2008 >> G6 Base, 3.5 N >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 3.5L - DTC P0010 To DTC P0333 >> DTC P0010 >> Component Testing >> Static Test

Static Test

  1. Ignition OFF, disconnect the CMP actuator solenoid harness connector at the CMP actuator solenoid.
    2. IMPORTANT: Ensure that the component is tested at 20°C (68°F).
  2. Test for 4.6-5.2 ohms between the high control and the low reference of the CMP actuator solenoid.
    • If the resistance is not within the specified range, replace the CMP actuator solenoid.
scientia non olet · About Mike's Workshop Manuals