Radio Antenna Module Replacement (Wagon)

WARNING: This page is about a different car, the 2010 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Radio Antenna Module (Wagon)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the liftgate upper trim finish panel. Refer to Liftgate Upper Trim Finish Panel Replacement (Wagon) .
1	Radio Antenna Module Bolt CAUTION: Refer to Fastener Caution . Tighten: 10 N.m (89 lb in)
2	Radio Antenna Module Assembly Procedure Disconnect the electrical connections. Disconnect the four integral retainers and the two integral bolt screws.

Callout

Component Name

Preliminary Procedure:
Remove the liftgate upper trim finish panel. Refer to Liftgate Upper Trim Finish Panel Replacement (Wagon) .

Radio Antenna Module Bolt

CAUTION: Refer to Fastener Caution .

Tighten: 10 N.m (89 lb in)

Radio Antenna Module Assembly

Procedure

Disconnect the electrical connections.
Disconnect the four integral retainers and the two integral bolt screws.