Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2008 >> G6 Base, 2.4 B >> Repair and Diagnosis >> Brakes >> Anti-Lock Brake System, Traction Control System & Stability Control System >> Diagnostic Information and Procedures >> DTC C0131 >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON, observe the scan tool BPP parameter while applying and releasing the brake pedal. The reading should change between Applied and Released.
  2. Verify that DTC C0277 or C0278 is not set.
  3. Replace the BPMV and verify DTC does not reset. If DTC reset, replace the EBCM.
scientia non olet · About Mike's Workshop Manuals