Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2008 >> G5 GT, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 2.4L - Introduction (2 Of 2) >> Repair Instructions >> Manifold Absolute Pressure Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying MAP Sensor
    GM1581050Courtesy of GENERAL MOTORS CORP.
  1. Remove the throttle body. Refer to Throttle Body Assembly Replacement .
  2. Disconnect the engine harness electrical connector from the manifold absolute pressure (MAP) sensor.
  3. Remove the MAP sensor and seal.
scientia non olet · About Mike's Workshop Manuals