Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2008 >> G5 Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 2.2L (L61) - Introduction (2 Of 2) >> Repair Instructions >> Ignition Coil Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Ignition Coils
    GM1578474Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the ignition coil(s).
  2. Install the ignition coil bolt(s).

    Tighten:  Tighten the bolt(s) to 10 N.m (89 lb in).

    3. Fig 2: View Of Intake Manifold Cover
    GM1751023Courtesy of GENERAL MOTORS CORP.
  3. Connect the ignition coil electrical connector(s) (1).
  4. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement .
scientia non olet · About Mike's Workshop Manuals