Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2008 >> G5 Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 2.2L (L61) - Introduction (2 Of 2) >> Repair Instructions >> Fuel Injection Fuel Rail Assembly Replacement >> Removal Procedure

Removal Procedure

  1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief (Without CH 48027)  or Fuel Pressure Relief (With CH 48027) .
  2. Remove the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement .
  3. Disconnect the fuel line fitting. Refer to Metal Collar Quick Connect Fitting Service .
  4. Disconnect the fuel injector harness connectors.
    5. Fig 1: View Of Fuel Rail
    GM1578472Courtesy of GENERAL MOTORS CORP.
  5. Remove the fuel rail attaching studs.
    6. IMPORTANT: Use care when removing the fuel rail assembly in order to prevent damage to the fuel injectors electrical connector terminals and spray tips.
  6. Remove the fuel rail using the following procedure:
    1. Pull the fuel rail back and upward to remove the fuel injectors from the cylinder head ports.
    2. Rotate the fuel rail in order to position the injectors downward.
    3. Remove the fuel rail.
  7. Remove the fuel injectors. Refer to Fuel Injector Replacement .
scientia non olet · About Mike's Workshop Manuals