Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2007 >> Vibe Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - Introduction (2 Of 2) >> Repair Instructions >> Positive Crankcase Ventilation Valve Replacement >> Installation Procedure

Installation Procedure

    Fig 1: PCV Valve, Hose Clamp And Valve Hose
    GM607626Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the PCV valve (1) into the cylinder head.

    Tighten:  Tighten the PCV valve to 27 N.m (13 lb ft).

  2. Connect the PCV valve hose (3) to the PCV valve (1).
  3. Secure the PCV valve hose with one clamp (2).
scientia non olet · About Mike's Workshop Manuals