Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2007 >> Vibe Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - Introduction (2 Of 2) >> Repair Instructions >> Mass Airflow Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Electrical Connector, Air Cleaner Housing, Mass Air Flow (Maf) Sensor And O-Ring
    GM828876Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the electrical connector (1) from the mass air flow (MAF) sensor (4).
  2. Remove the two fasteners.
  3. Remove the MAF sensor (4) from the air cleaner housing (2).
  4. Remove the O-ring (3).
scientia non olet · About Mike's Workshop Manuals