Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2007 >> Vibe Standard >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Cellular System, Entertainment System, And Navigation System >> Repair Instructions >> Radio Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Radio Components
    GM834108Courtesy of GENERAL MOTORS CORP.
  1. Remove the IP accessory center trim plate. Refer to Instrument Panel Center Trim Panel Replacement .
  2. Remove the 4 screws (1) which secure the radio (2).
  3. Disconnect the clamp (4) from the radio receiver bracket (3).
    4. Fig 2: Antenna Lead And Electrical Connector
    GM240883Courtesy of GENERAL MOTORS CORP.
  4. Pull the radio (2) from the instrument panel.
  5. Disconnect the following from the radio:
    • The electrical connector
    • The antenna lead (1)
scientia non olet · About Mike's Workshop Manuals