Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2007 >> Solstice Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Diagnostic Information and Procedures >> DTC P0571 >> Circuit/System Testing

Circuit/System Testing

  1. Ignition ON, verify that the Stop Lamp Pedal Switch parameter in the ECM reads Released while depressing the brake pedal.
    • If the Stop Lamp Pedal Switch parameter reads Applied, replace the ECM.
  2. Ignition OFF, test the stop lamp switch signal circuit for an open/high resistance, a short to ground or a short to voltage. If the circuit tests normal, replace the BCM.