Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2007 >> Grand Prix Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (Anti-Lock Brake System, Traction Control System & Stability Control System) >> Diagnostic Information and Procedures >> DTC C0236 >> Repair Verification

Repair Verification

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify all connectors are reconnected.
  2. With the scan tool, clear the DTC.
  3. Disconnect the scan tool from the data link connector (DLC).
  4. Engine ON, test for DTC C0236 to reset.
    • If the DTC or DTCs is set, program the EBCM refer to Control Module References . If the DTC or DTCs resets, replace the EBCM.
scientia non olet · About Mike's Workshop Manuals