Component Testing
WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the wheel speed sensor connector.
- With the ignition OFF, measure for 800-1600 ohms of resistance across the wheel speed sensor.
- If the resistance is not between 800-1600 ohms replace the faulty wheel speed sensor.
- Spin the wheel, with a scan tool measure the AC voltage across the wheel speed sensor for 100 mv AC or greater.
- If the AC voltage is less than 100 mv replace the faulty wheel speed sensor.