Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2007 >> G6 Base, 2.4 B >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 2.4L - Diagnosis & Troubleshooting >> Fuel Tank Leak Test >> System Testing

System Testing

IMPORTANT: If the floating indicator registers any flow after stabilizing, a leak is evident.
  1. Turn OFF the ignition. Install the J 41413-200  and the GE-41415-50  . See Special Tools . Test for a fuel leak while the system is under pressure referring to the J 41413-210 Operation Manual.
    IMPORTANT: It may be necessary to partially lower the fuel tank.
  2. Using the J 41413-200  and the J 41413-210 Operation Manual, introduce smoke into the evaporative emission (EVAP) system. See Special Tools . Inspect for leaks in any of the following locations:
    • The fuel tank, the fill limiter vent valve, the pressure relief valve, and the grade vent valves
    • The fuel sender housing, the fuel sender seal, the fuel pipe, and the EVAP pipes
    • The fuel tank pressure (FTP) sensor seal
    • The fuel fill pipe and hose
scientia non olet · About Mike's Workshop Manuals