Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2006 >> Vibe GT >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 1.8L (LNK) - Introduction (2 Of 2) >> Repair Instructions >> Accelerator Controls Pedal Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View of Accelerator Cable and Throttle Lever
    GM236863Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the accelerator cable from the accelerator pedal lever.
  2. Remove the 2 bolts (3).
  3. Remove the accelerator pedal and the pedal lever from the vehicle.
  4. Remove the one retainer, the spring, the pin, and the accelerator pedal from the pedal lever.
scientia non olet · About Mike's Workshop Manuals