Test Description
WARNING: This page is about a different car, the 2005 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
The number below refers to the step number on the diagnostic table.
- 3: This step determines if the malfunction is caused by an internal EBCM malfunction.
Stability System Caution Indicator Inoperative
| Step | Action | Yes | No |
|---|---|---|---|
| Schematic Reference: ABS Schematics Connector End View Reference: ABS Connector End Views |
|||
| 1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | Go to Diagnostic System Check - Vehicle in Vehicle DTC Information |
| 2 | Do any of the other instrument cluster indicators or gages function? | Go to Step 3 | Go to Gages Inoperative - All in Instrument Panel, Gages, and Console |
| 3 |
|
Go to Step 6 | Go to Step 4 |
| 4 | Test the VSC indicator control circuit for an open or high resistance. Refer to Circuit Testing
and Wiring Repairs
in Wiring Systems. Did you find and correct the condition? |
Go to Step 7 | Go to Step 5 |
| 5 | Replace the instrument panel cluster assembly. Refer to Instrument Panel Cluster (IPC) Replacement
in Instrument Panel, Gages, and Console. Did you complete the replacement? |
Go to Step 7 | - |
| 6 | Replace the brake pressure modulator valve (BPMV). Refer to Brake Modulator Assembly Replacement (Without VSC) or Brake Modulator Assembly Replacement (With VSC) . Is the repair complete? |
Go to Step 7 | - |
| 7 | Operate the system in order to verify the repair. Did you correct the condition? |
System OK | Go to Step 2 |