Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2006 >> Vibe Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Cellular Communication Systems) >> Repair Instructions >> Antenna Assembly Replacement - Cellular and Navigation >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the antenna.
    2. NOTE: Fastener Notice in Cautions and Notices.
    Fig 1: Installing Antenna Mounting Bracket And Mounting Bracket Bolt
    GM1528409Courtesy of GENERAL MOTORS CORP.
  2. Install the antenna mounting bracket and mounting bracket bolt.

    Tighten:  Tighten the antenna mounting bracket bolt to 6 N.m (53 lb in).

    3. Fig 2: Installing Antenna Harness In Antenna Harness Retaining Clips
    GM1528406Courtesy of GENERAL MOTORS CORP.
  3. Install the antenna harness in the antenna harness retaining clips (1).
    4. Fig 3: Connect 1 Antenna Connector
    GM1528404Courtesy of GENERAL MOTORS CORP.
  4. Connect 1 antenna connector (1).
    5. Fig 4: Connecting 2 Antenna Connectors
    GM1528403Courtesy of GENERAL MOTORS CORP.
  5. Connect 2 antenna connectors (1).
  6. Install the headliner. Refer to Headliner Replacement in Interior Trim.
scientia non olet · About Mike's Workshop Manuals