Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2006 >> Vibe Base, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 1.8L (LV6) - Introduction (2 Of 2) >> Repair Instructions >> Accelerator Controls Cable Replacement (AWD w/o Cruise Control) >> Removal Procedure

Removal Procedure

    Fig 1: Cruise Control Cable Components
    GM181797Courtesy of GENERAL MOTORS CORP.
  1. Loosen the cable adjusting locknuts (1).
  2. Remove the accelerator cable from the bracket.
  3. Disconnect the accelerator cable from the throttle lever (3). Opening the throttle lever by hand will aide in the accelerator cable removal.
    4. Fig 2: View of Accelerator Cable and Throttle Lever
    GM236863Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the accelerator cable from the accelerator pedal.
  5. Disconnect the 2 bolts (2) and accelerator cable (5) and the bracket (1) at the bulkhead
  6. Disconnect the accelerator control cable (5) from the vehicle.
scientia non olet · About Mike's Workshop Manuals