Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2006 >> Vibe Base, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Starter Motor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Upper And Lower Mounting Bolts
    GM325407Courtesy of GENERAL MOTORS CORP.
    CAUTION: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.
  1. Disconnect the negative (-) battery cable.
  2. Remove the starter motor electrical connector from the starter solenoid.
  3. Remove the retaining nut and the positive (+) battery cable from the starter solenoid.
  4. Remove the upper mounting bolt (1).
  5. Remove the lower mounting bolt (2) and the starter motor from the vehicle.
scientia non olet · About Mike's Workshop Manuals