Removal Procedure
CAUTION:
Refer to Battery Disconnect Caution
in Cautions and Notices.
- Record all of the customers radio station presets.
- Turn OFF all the lamps and accessories.
- Make sure the ignition switch is in the OFF position.
- Disconnect the powertrain control module (PCM) wire harness (2) from the battery box cover.
- Remove the PCM bracket with PCM (1) from the top of the battery box cover.
- Carefully position the PCM and bracket out of the way.
- Loosen the screws securing the battery box cover.
- Remove the battery box cover (1).
- Loosen the battery negative cable terminal bolt.
- Remove the battery negative cable from the battery.