Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2006 >> Solstice Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 2.4L - Introduction (2 Of 2) >> Repair Instructions >> Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: MAF/IAT Sensor
    GM1594069Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the MAF/IAT sensor.
  2. Install the MAF/IAT sensor screws.

    Tighten:  Tighten the screws to 0.6 N.m (5 lb in).

    3. Fig 2: MAF/IAT Sensor Electrical Connector
    GM1592530Courtesy of GENERAL MOTORS CORP.
  3. Connect the MAF/IAT sensor electrical connector.
scientia non olet · About Mike's Workshop Manuals