Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2006 >> Solstice Standard >> Repair and Diagnosis >> Body & Frame >> Windows >> Door System, Mirror System & Window System >> Diagnostic Information and Procedures >> Power Windows Inoperative - All >> Circuit/System Testing

Circuit/System Testing

  1. Ignition OFF, disconnect the driver power window switch.
  2. Ignition ON, verify that a test lamp illuminates between the driver power window switch voltage supply circuit and ground.
    • If the test lamp does not illuminate, repair the power window switch voltage supply circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the BCM.
  3. Verify that a test lamp illuminates between the driver power window switch voltage supply circuit and the driver power window switch ground circuit at the driver power window switch harness connector.
    • If the test lamp does not illuminate, repair the driver power window switch ground circuit for a short to voltage or an open/high resistance.
  4. If all circuits test normal, test or replace the driver power window switch.
scientia non olet · About Mike's Workshop Manuals