Removal Procedure
IMPORTANT:
Do not attempt repairs in order to correct lock discrepancies. Replace the lock.
- Remove the front door trim panel. Refer to Trim Panel Replacement - Side Front Door .
- Remove the front door water deflector. Refer to Water Deflector Replacement - Front Door .
- Open the outside handle rod to lock clip located on the door lock.
The outside handle rods should be loose from the lock.
- Remove the lock cylinder rod from the outside door handle. Refer to Lock Cylinder Replacement - Door .
- Remove the inside door handle. Refer to Door Handle Replacement - Front Inside .
- Remove the screws (1, 3, 2) from door lock.
- Remove the door lock and rods through the access hole in the door inner panel.
- Disconnect the electrical connector (2) from the lock by pulling out on the tab (1).
- Remove the rods from the door lock.