Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2006 >> GTO Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 6.0L - Introduction (2 Of 2) >> Repair Instructions >> Manifold Absolute Pressure (MAP) Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Oil Filler Cap, Right Sight Shield, MAP Sensor & Electrical Connector
    GM1464034Courtesy of GENERAL MOTORS CORP.
  1. Remove the oil filler cap (1).
  2. Remove the right engine sight shield (2).
  3. Disconnect the manifold absolute pressure (MAP) sensor electrical connector (3).
    4. Fig 2: MAP Sensor & Grommet
    GM1408858Courtesy of GENERAL MOTORS CORP.
  4. Remove the MAP sensor (714) from the intake manifold.
scientia non olet · About Mike's Workshop Manuals