Removal Procedure
- Disconnect negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
- Remove the air cleaner resonator. Refer to Air Cleaner Outlet Resonator Replacement .
- Remove the drive belt. Refer to Drive Belt Replacement .
- Remove the radiator inlet hose. Refer to RADIATOR HOSE REPLACEMENT - INLET (LE5) .
- Disconnect the generator electrical connector (1).
- Reposition the rubber boot (3).
- Remove the engine harness terminal lead to generator nut (2).
- Remove the engine harness terminal (4) from the generator stud.
- Remove the generator bolts.
- Remove the generator.