Test Description
The number below refers to the step number on the diagnostic table.
- 3: This step determines if the malfunction is caused by an internal EBCM malfunction.
Stability System Caution Indicator Inoperative
| Step | Action | Yes | No |
|---|---|---|---|
| Schematic Reference: ABS Schematics Connector End View Reference: ABS Connector End Views |
|||
| 1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | Go to Diagnostic System Check - Vehicle in Vehicle DTC Information |
| 2 | Do any of the other instrument cluster indicators or gages function? | Go to Step 3 | Go to Gages Inoperative - All in Instrument Panel, Gages, and Console |
| 3 |
|
Go to Step 6 | Go to Step 4 |
| 4 | Test the VSC indicator control circuit for an open or high resistance. Refer to Circuit Testing
and Wiring Repairs
in Wiring Systems. Did you find and correct the condition? |
Go to Step 7 | Go to Step 5 |
| 5 | Replace the instrument panel cluster assembly. Refer to Instrument Panel Cluster (IPC) Replacement
in Instrument Panel, Gages, and Console. Did you complete the replacement? |
Go to Step 7 | - |
| 6 | Replace the brake pressure modulator valve (BPMV). Refer to Brake Modulator Assembly Replacement (Without VSC) or Brake Modulator Assembly Replacement (With VSC) . Is the repair complete? |
Go to Step 7 | - |
| 7 | Operate the system in order to verify the repair. Did you correct the condition? |
System OK | Go to Step 2 |