Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2005 >> Grand Prix Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Controls - 5.3L - Introduction) >> Repair Instructions >> Accelerator Pedal Position (APP) Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Accelerator Pedal
    GM910941Courtesy of GENERAL MOTORS CORP.
  1. Remove the left instrument panel sound insulator. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages and Console.
  2. Disconnect the accelerator pedal position sensor (APP) electrical connector.
  3. Remove the accelerated pedal bolts (2).
  4. Remove the accelerator pedal (1) from the vehicle.
scientia non olet · About Mike's Workshop Manuals