Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2005 >> Grand Prix Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.8L - Introduction >> Repair Instructions >> Fuel Pressure Gage Installation and Removal >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Fuel Pressure Gauge J 34730-1A
    GM180378Courtesy of GENERAL MOTORS CORP.
  1. Remove the bleed hose on the J 34730-1A  from the approved container. See Special Tools .
  2. Remove the shop towel from around the fitting and discard into an approved container.
  3. Disconnect the J 34730-1A  from the fuel pressure valve. See Special Tools .
  4. Install the fuel pressure fitting cap.
scientia non olet · About Mike's Workshop Manuals