Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2005 >> G6 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Lighting Systems) >> Repair Instructions >> Daytime Running Lamps (DRL) Ambient Light Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Daytime Running Lamps (DRL) Ambient Light Sensor
    GM318097Courtesy of GENERAL MOTORS CORP.
  1. Install the DRL sensor to the wiring harness.
  2. Position the DRL sensor in the I/P upper trim and twist the sensor to secure.
  3. Install the security system LED. Refer to LED Indicator Replacement - Vehicle Security System in Theft Deterrent.
  4. Install the I/P upper trim. Refer to Upper Trim Pad, Outer Trim Cover, Fuse Block Access Cover Replacement - Instrument Panel in Instrument Panel, Gages and Console.
scientia non olet · About Mike's Workshop Manuals