Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2005 >> G6 Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.5L (Lx9) - Introduction >> Repair Instructions >> Exhaust Gas Recirculation (EGR) Pipe Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Removing EGR Pipe
    GM1239050Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the EGR pipe to the exhaust manifold.

    Tighten:  Tighten the EGR pipe bolts to 25 N.m (18 lb ft).

  2. Install the EGR pipe to the EGR valve.
  3. Install the EGR pipe bolt.

    Tighten:  Tighten the bolt to 30 N.m (22 lb ft).

scientia non olet · About Mike's Workshop Manuals