Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2005 >> Aztek Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Engine Control System 3.4L (Introduction)) >> Repair Instructions >> Exhaust Gas Recirculation (EGR) Pipe Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the exhaust gas recirculation (EGR) pipe bolt and carefully pull the pipe assembly back.
  2. Remove the EGR pipe assembly nut from the exhaust manifold.
  3. Remove the EGR pipe.
    4. Fig 1: Removing EGR Pipe
    GM621066Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals