Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle - Introduction & Repair Instructions >> Repair Instructions >> Torque Converter Clutch Pulse Width Modulation (TCC PWM) Solenoid Replacement >> Removal Procedure

Removal Procedure

  1. Remove the case side cover. Refer to Case Side Cover Replacement .
  2. Disconnect the transaxle wiring harness.
    3. Fig 1: View Of TCC PWM Solenoid
    GM49380Courtesy of GENERAL MOTORS CORP.
  3. Remove the torque converter clutch PWM solenoid (334).
scientia non olet · About Mike's Workshop Manuals