Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Door System, Mirror System & Window System) >> Repair Instructions >> Power Door Lock Switch Replacement (Impala) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the inside door handle bezel. Refer to Handle Bezel Replacement - Inside (Impala)  or Handle Bezel Replacement - Inside (Monte Carlo) .
  2. Fig 1: Inside Door Handle Bezel & Power Door Lock Switch (Impala)
    GM498526Courtesy of GENERAL MOTORS CORP.
  3. Remove the power door lock switch from the inside door handle bezel using a small, flat-bladed tool in order to release the retainers.
  4. Fig 2: Power Door Lock Switch (Impala)
    GM498527Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the electrical connector from the power door lock switch.