Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Shift Interlock System) >> Repair Instructions >> Automatic Transmission Shift Lock Actuator Replacement (Column Shift) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the knee bolster bracket. Refer to Knee Bolster Bracket Replacement - Left in Instrument Panel, Gages, and Console.
  2. Disconnect the automatic shift lock actuator electrical connector.
  3. Remove the actuator from the steering column ball studs.
    4. Fig 1: View Of Automatic Transmission Shift Lock Control Actuator
    GM324906Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals