Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Wiper System & Washer System) >> Repair Instructions >> Wiper Arm Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition ON.
  2. Turn the wiper switch to DELAY.
  3. Turn the ignition OFF when the wiper arms are paused at the bottom of the wipe pattern.
  4. Disconnect the washer hose from the wiper arm.
  5. Remove the wiper arm nut cover.
  6. Remove the wiper arm nut.
  7. Using the J 39822  (see Special Tools ), remove the wiper arm from the wiper transmission.
    8. Fig 1: Wiper Arms & Components
    GM334231Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals