Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Body Front End) >> Repair Instructions >> Fender Sound Insulator Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front fender liner. Refer to Front Fender Liner Replacement .
  2. Remove the front fender insulator nut by pulling off.
  3. Fig 1: Front Fender Insulator Nut
    GM456674Courtesy of GENERAL MOTORS CORP.
  4. Remove the front fender insulator tab from the under fender mounting bracket.
  5. Fig 2: Front Fender Insulator Tab
    GM456677Courtesy of GENERAL MOTORS CORP.
  6. Remove the front fender insulator from the inner fender.
  7. Fig 3: Front Fender Insulator
    GM456680Courtesy of GENERAL MOTORS CORP.