Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Bumper System) >> Repair Instructions >> Energy Absorber Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the front bumper energy absorber to the front bumper fascia.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the front bumper energy absorber screws.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

    3. Fig 1: View Of Front Bumper Fascia
    GM1230013Courtesy of GENERAL MOTORS CORP.
  3. Install the front bumper fascia. Refer to Fascia Replacement - Front Bumper  .
scientia non olet · About Mike's Workshop Manuals