Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.4L - Introduction >> Repair Instructions >> Crankshaft Position (CKP) Sensor Replacement (24X CKP Sensor) >> Removal Procedure

Removal Procedure

    Fig 1: Identifying CKP Sensor
    GM14714Courtesy of GENERAL MOTORS CORP.
  1. Turn OFF the ignition.
  2. Raise the vehicle on a hoist. Refer to Lifting and Jacking the Vehicle in General Information
  3. Remove the crankshaft harmonic balancer. Refer to Crankshaft Balancer Replacement in Engine Mechanical.
  4. Note the routing of the sensor harness before removal.
  5. Remove the harness retaining clip (3) with the bolt (4).
  6. Disconnect the sensor electrical connector.
  7. Remove the sensor bolts (4).
  8. Remove the sensor (1).
scientia non olet · About Mike's Workshop Manuals