Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Entertainment Systems >> Repair Instructions >> Receiver Replacement - Digital Radio >> Installation Procedure

Installation Procedure

    Fig 1: View Of Radio Wiring Harness
    GM955738Courtesy of GENERAL MOTORS CORP.
  1. Install the XM digital radio receiver to the receiver bracket.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the radio receiver nuts.

    Tighten:  Tighten the nuts to 4 N.m (35 lb in).

    3. Fig 2: Identifying XM Digital Radio Receiver
    GM955754Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical connector and the antenna connectors to the XM radio receiver.
  4. Install the I/P compartment. Refer to Compartment Replacement - Instrument Panel (I/P) in Instrument Panel, Gages, and Console.
  5. Perform the setup procedure for the digital radio receiver. Refer to Digital Radio Receiver Setup .
scientia non olet · About Mike's Workshop Manuals