Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2004 >> Vibe Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Lighting Systems) >> Repair Instructions >> Headlamp Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Turn Signal/Headlamp Switch
    GM833134Courtesy of GENERAL MOTORS CORP.
  1. Install the turn signal/headlamp switch (1) to the steering column. Secure the switch until the tab locks (2).
  2. Connect the turn signal/headlamp switch electrical connector.
    3. Fig 2: Identifying Upper Steering Column Components
    GM820027Courtesy of GENERAL MOTORS CORP.
  3. Install the steering column upper trim cover (7) to the vehicle.
  4. Install the steering column lower trim cover (6) to the vehicle. Secure the trim cover with the 3 screws.
  5. Enable the SIR System. Refer to SIR Disabling and Enabling Zone 3 in SIR.
scientia non olet · About Mike's Workshop Manuals