Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2004 >> Vibe Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Shift Interlock System) >> Diagnostic Information and Procedures >> Scan Tool Data List

Scan Tool Data List

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
Body Control Module (BCM)

Scan Tool Parameter Data List Units Displayed Typical Data Value
Operating Conditions: Ignition ON, with the engine OFF. Transmission shift lever in the PARK position.
Battery Voltage BCM Data 0-15 volts 14 volts
Ignition 1 Inputs ON/OFF ON
BTSI Output Inputs ON/OFF ON
Park (BTSI) Output Feed Outputs ON/OFF ON
Powertrain Control Module (PCM)

Scan Tool Parameter Data List Units Displayed Typical Data Value
Operating Conditions: Ignition ON, with the engine OFF. Transmission shift lever in the PARK position.
Current Gear Transmission Data - -
TR Sw. A/B/C/P Transmission Data Park, Park/Reverse, Reverse, Reverse/Neutral, Neutral, Neutral/Drive 4, Drive 4, Drive 4/Drive 3, Drive 3, Drive 3/Drive 2, Drive 2, Drive 2/Drive 1, Drive 1, Invalid, Open -
TCC Brake Switch   ON/OFF OFF