Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2004 >> Vibe Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Cruise Control System) >> Repair Instructions >> Clutch Pedal Cruise Control Release Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Depress the brake pedal and insert the cruise control release switch into the bracket until the retainer is fully seated.
  2. Connect the electrical connector to the cruise control release switch.
  3. Adjust the cruise control release switch as needed. Refer to Clutch Pedal Cruise Control Release Switch Adjustment .
  4. Install the left instrument panel insulator.
    Fig 1: Connecting Cruise Control Release Switch Electrical Connector
    GM701979Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals