Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2004 >> Sunfire Automatic >> Repair and Diagnosis >> Brakes >> Antilock Brake System And Traction Control System >> Repair Instructions >> Brake Pressure Modulator Valve (BPMV) Bracket Replacement >> Installation Procedure

Installation Procedure

  1. Install the BPMV bracket into position in the vehicle.
    Fig 1: View Of BPMV Bracket
    GM1311227Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the master cylinder mounting nuts.

    Tighten:  Tighten the nuts to 27 N.m (20 lb ft).

  3. Install the EBCM/BPMV assembly to the mounting bracket.
    Fig 2: View Of EBCM/BPMV Assembly Mounting Bracket
    GM1311226Courtesy of GENERAL MOTORS CORP.
  4. Install the EBCM/BPMV assembly to mounting bracket bolt.

    Tighten:  Tighten the bolt to 10 N.m (89 lb in).

scientia non olet · About Mike's Workshop Manuals