Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2004 >> GTO Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls -- 5.7L -- (Introduction) >> Repair Instructions >> Crankshaft Position (CKP) Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the starter. Refer toStarter Motor Replacement in Engine Electrical.
    Fig 1: View Of Starter
    GM211621Courtesy of GENERAL MOTORS CORP.
    3. Fig 2: Identifying Crankshaft Position (CKP) Sensor/Connector
    GM56592Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the crankshaft position (CKP) sensor electrical connector.
    4. Fig 3: View Of CKP Sensor & Bolt
    GM55322Courtesy of GENERAL MOTORS CORP.
  4. Remove the CKP sensor retaining bolt.
  5. Remove the CKP sensor.
scientia non olet · About Mike's Workshop Manuals