Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2004 >> Bonneville GXP >> Repair and Diagnosis >> Brakes >> Antilock Brake System, Traction Control System & Stability Control System >> Repair Instructions >> Traction Control Switch Replacement (w/NW9) >> Removal Procedure

Removal Procedure

  1. Remove the trim plate bezel - IP Cluster. Refer to Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages and Console.
  2. Remove the console accessory switch mount plate. Refer to Console Accessory Switch Mount Plate Replacement in Instrument Panel, Gages and Console.
    3. Fig 1: Locating Traction Control Switch Electrical Connector
    GM803463Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connector (2) from the traction control switch.
  4. Remove the traction control switch mounting screw (1).
  5. Remove the traction control switch (3).
scientia non olet · About Mike's Workshop Manuals