Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Suspension Control System - Suspension Leveling >> Repair Instructions >> Air Tube Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Air Tubes Connected To Shock Absorbers
    GM517949Courtesy of GENERAL MOTORS CORP.
  1. Install the right rear air tube on the vehicle in the routing clips.
  2. Connect the right rear air tube to the tee connector.
  3. Connect the right rear air tube to the right rear shock absorber.
  4. Connect the left rear air tube to the tee connector.
  5. Connect the left rear air tube to the right rear shock absorber.
    6. IMPORTANT: Before driving the vehicle, turn the ignition on and wait approximately 45 seconds. This will ensure that the air adjustable shock absorbers are filled with residual pressure.
  6. Lower the vehicle.
scientia non olet · About Mike's Workshop Manuals