Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Suspension Control System - Suspension Leveling >> Repair Instructions >> Air Compressor Shield Replacement >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Lower the automatic level control (ALC). air compressor assembly. Refer to Air Compressor Replacement .
    3. Fig 1: Locating ALC Shield Bolt
    GM898568Courtesy of GENERAL MOTORS CORP.
  3. Remove the ALC shield bolt (1) and retainers.
  4. Remove the ALC shield (2) from the vehicle.
scientia non olet · About Mike's Workshop Manuals