Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC Systems - Manual >> Repair Instructions >> HVAC Control Module Replacement (Pontiac) >> Removal Procedure

Removal Procedure

  1. Remove the I/P accessory trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory (Aztek) in Instrument Panel, Gages and Console.
    2. Fig 1: View Of HVAC Control Module Retaining Screws (Pontiac)
    GM629137Courtesy of GENERAL MOTORS CORP.
  2. Remove the HVAC control module retaining screws.
    3. Fig 2: HVAC Control Module (Pontiac)
    GM651475Courtesy of GENERAL MOTORS CORP.
  3. Pull the HVAC control module straight out from the I/P.
  4. Disconnect the HVAC control module electrical connectors.
scientia non olet · About Mike's Workshop Manuals