Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC Systems - Automatic >> Repair Instructions >> Sun Load Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Remove the windshield garnish molding. Refer to Garnish Molding Replacement - Windshield Pillar in Interior Trim.
    2. IMPORTANT: Remove the I/P upper trim panel slowly, the retainer clips could possibly fall into the I/P.
    Fig 1: View Of I/P Upper Trim Panel
    GM618058Courtesy of GENERAL MOTORS CORP.
  2. Lift the I/P upper trim panel up approximately 51 mm (2 in) and pull rearward to release I/P upper trim panel retainers.
  3. Lift the I/P upper trim panel to access sun load sensor.
  4. Disconnect the sunload sensor electrical connector.
  5. Remove the sun load sensor.
scientia non olet · About Mike's Workshop Manuals