Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC Systems - Automatic >> Repair Instructions >> Sun Load Sensor Replacement >> Installation Procedure

Installation Procedure

  1. Install sun load sensor.
  2. Connect the sunload sensor electrical connector.
    3. Fig 1: View Of Sun Load Sensor
    GM182418Courtesy of GENERAL MOTORS CORP.
  3. Align the I/P upper trim locating pins and the retainers to the slots in the I/P.
    4. Fig 2: View Of I/P Upper Trim Panel
    GM618058Courtesy of GENERAL MOTORS CORP.
  4. Push forward and down on the I/P upper trim panel to lock into place.
  5. Install the windshield garnish molding. Refer to Garnish Molding Replacement - Windshield Pillar in Interior Trim.
scientia non olet · About Mike's Workshop Manuals