Installation Procedure

Fig 1: View Of Recirculation Actuator Mounting Screws

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the recirculation actuator mounting screws.
Tighten: Tighten the screws to 1.6 N.m (14 lb in).

Fig 2: Locating Actuator Connector

Courtesy of GENERAL MOTORS CORP.

Connect the recirculation actuator electrical connector.
Install the upper I/P trim pad. Refer to Compartment Replacement - Instrument Panel (I/P) in Instrument Panel, Gages and Console.